Military Applications

CERATECH designs, manufactures and supplies high performance “green sustainable” concrete repair and new construction cements for a wide range of applications within the US Military.

CERATECH’s products are currently in use  in Irag and Afghanistan in support of OIF and OEF, providing for rapid repairs to airfields, runways, theater infrastructure and IED mitigation. Our products are specified for The USMC ADR ( Airfield Damage Repair kits) as well as by NAVFAC, in support of the V-22.
 
CERATECH’s new construction cement, RediMAX™, has been used to dramatically compress project timelines for deliberate installations at the Mountain Warfare Training Center in Bridgeport, California and for “Proof of Concept” projects at USMC Camp Lejeune , North Carolina..

All of CERATECH’s products are corrosion resistant and possess low permeability characteristics making them less susceptible to chloride, sulfate and chemical attack. CERATECH products are highly durable, resisting scaling and damage in freeze thaw environments.

Significantly reduce operational downtime by executing deliberate expedient repairs and or new construction projects in expeditionary contingency environments!

Pavemend SLQ  Pavemend 15.0   Pavemend TR

Pavemend VR  RediMAX  Mainline

FireRok™ is a cementitious, high-early strength concrete that can be used either as a repair product or as a structural concrete. Within 24 - 72 hours of placement, the product can be placed in high temperature environments as high as 1800ºF. It can be blended in small volumes using a conventional drum mixer, and is also available for transit truck applications as well. FireRok™has been designed for areas which are exposed to high temperatures either from an intermittent or a continuous heat source. This would include runway areas exposed to jet blast, HPUs, oven, and metal casting areas.
		Heat resistant concrete For repair or new construction Protect agaisnt thermal events and cycling of intense heat Within 24-72 hours of placement can be place in temperatures >1800ºF Specified by NAVFAC for V-22 operations! Technical data »

CERATECH’s Pavemend™ brand of high performance concrete repair products are being utilized extensively from the Korean peninsula to Afghanistan, Iraq and the US by both military, state DOTs and private contractors to address a myriad of challenging surface transportation issues. All Pavemend™ Rapid Repair products are single component powders that are water activated.

	Semi-Leveling VERY RAPID Repair Mortar, Trowelable & Extendable	4 - 6 minutes working time @72°F 1 hour return to service (> 3,000 psi) Applicable from 0°F /-17°C to 110°F /43°C Extendable up to 100% by weight with 3/8” (1cm) or 1/2” (1.3cm) clean washed fractured stone 46 lb. (20.8 kg) 5 Gallon / 19L Bucket Yield ( Neat) 0.42 ft³ / .012m³ Yield (Extended 100%) 0.80 ft³ /.022m³ Technical data »
	Self Leveling VERY RAPID Repair Mortar	7 - 9 minutes working time @72°F 2 hour return to service (>3,000 psi) Applicable from 30°F /-1°C to 120°F /49°C 45 lb. (20.4 kg) 5 Gallon 19L Bucket Yield ( Neat ) 0.42 ft³ / .012m³ Ideal for pre-cast grouting Technical data »
	Semi Leveling RAPID Repair Mortar, Trowelable & Extendable	25 - 30 minutes working time @ 72°F 3 hour return to service (>3,000 psi) Applicable from 40°F /4°C to 140°F /60°C Extendable up to 100% by weight with 3/8” (1cm) or 1/2” (1.3cm) clean washed fracture stone 47 lb.(21.3 kg) 5 Gallon / 19L Bucket Yield ( Neat) 0.43 ft³/ .012m³ Yield (Extended 100%) 0.80 ft³ /.022m³ Can be returned to a gel state by re-mixing with drill and paddle Technical data »
	Vertical & Overhead RAPID Repair Mortar	25 - 30 minutes working time @ 72°F Applicable from 40°F /4°C to 100°F /37°C 17 lb. (7.7 kg) 2 Gallon / 7.6L Bucket Yield (Coverage) @ 0.25” profile = 7.4 ft2 @ 0.50” profile = 3.7 ft2 @ 1.00” profile = 1.9 ft2 @ 4.00” profile = 0.48 ft2 Can be returned to a gel state by re-mixing with drill and paddle Technical data »

CERATECH’s rapid large area volumetric cement, GreatWhite120™ is an extremely versatile, cementitious, rapid setting, semi-leveling structural repair concrete. It is a single component powder that is water activated. GreatWhite120™ cement is designed for use with volumetric concrete mixers to efficiently address large scale, full or partial depth rapid highway repair projects
	Rapid Large Area Volumetric Cement	20 minutes of working time @ 72°F 2 hour return to service (>2,500 psi) from the addition of water Applicable from 30°F/-1°C to 120°F/49°C Finishes like traditional Portland based concrete Yield 3.3ft³ per 2,200 super sack Available in 70lb plastic bags or 2,200 Super Sacks. Technical data »

D.O.T.Line™ & Mainline™ Rapid Repair Concrete were specifically developed to provide an economical solution to real world repairs of critical infrastructure. D.O.T.Line™ & Mainline™ are turn-key, semi-leveling, high performance structural repair concretes. ;
	Rapid Structural Repair Concrete	25 minutes of working time @ 72°F 2 hour return to service (>2,500 psi) from the addition of water Applicable from 30°F/-1°C to 120°F/49°C Finishes like traditional Portland based concrete Yield (#8 - 3/8” fractured stone- included) 0.40ft³ Available in 53.5lb plastic bags Technical data »
	Rapid Structural Repair Concrete	35 minutes of working time @ 72°F 4 hour return to service (>2,000 psi) from the addition of water Applicable from 30°F/-1°C to 120°F/49°C Finishes like traditional Portland based concrete Yield (#8 - 3/8” fractured stone- included) 0.40ft³ Available in 53.5lb plastic bags Technical data »

RediMAX™ is an ultra high performance structural concrete suitable for most traditional applications. It can be configured and delivered from a batch plant via transit truck, introduced into a transit mixer at your site with super sacks or prepared at an “on-site” batch plant for dump truck delivery projects. Unlike Portland concrete however, RediMAX™ remains in an unreacted state until water and RediMAX™ admixture are introduced. This benefit allows for improved scheduling flexibility, eliminating the possibility of material loss due to the standard 90 minute water to discharge constraint. Low permeability offers enhanced corrosion resistance to reinforcing steel and less susceptibility to chloride, sulfate and chemical attack. RediMAX™ is highly durable, resisting scaling and damage in freeze thaw enviroments.
	High Performance Structural Concrete	90 minutes to be discharged, placed and finished (Once activated) Compressive strengths of over 3,000 psi are possible within 6 hours! RediMAX™ can be field adjusted for required slump and working time. Formwork can be stripped in 4 hours Commercial steel construction in only 6 hours from placement with compressive strengths > 3,000 psi. Applicable in ambient temperatures to 0°F without admixtures or supplemental heat Technical data »
	Cold Weather Building Solutions	RediMAX-C™ is a versatile, cold weather, high performance structural concrete RediMax-C™ can be effectively placed in ambient temperatures ranging from 0 to 40°F without the need to follow traditional post hydration curing practices. RediMax-C™ is mixed and placed like traditional Portland concrete, has 145 minutes of working time, depending on ambient temperatures, and can be finished via standard concrete finishing practices. RediMax-C™ will achieve compressive strengths of more than 3000 psi within 24 hours following the addition of water. Technical data »

CERATECH’s RediMAX™ cement binder technology facilitates “Roller Compacted Concrete” by producing a tighter matrix that resists water intrusion and provides for a smoother, more durable wearing surface. Exceptional flexural and compressive strengths allow for better bridging of sub base voids and imperfections. !Compressive strengths over 3,000 psi in 24 hours!
	Roller Compacted Concrete (RCC)	Technical data »

CERATECH’s revolutionary “green” engineered cement technology is now available for masonry construction projects. The FORTRESS™ Extreme Masonry Construction System™ offers unparalleled strengths enabling superior masonry construction techniques. FORTRESS™ Extreme Masonry Grout & Mortar can dramatically increase wall strengths & productivity when used in conjunction with conventional Portland Cement based CMU’s as it offers bond strengths to 11,000 psi!
	Design & Build With GREEN Masonry!	12,000 psi CMU’s 11,000 psi Mortar 10X Mortar Bond Strength Very Low Permeability Design / Build Taller Structures Grout Strengths To 12,000 psi Create Monolithic Structures Build “Shear” Walls Improved Fire Resistance Grout Technical data » Mortar Technical data »
	Design & Build With GREEN Masonry!

GATORDIRT™ is an ideal material for increasing the load bearing capacity of in situ soils minimizing or eliminating the expense of removing and replacing unsuitable soils. Depending on the nature of existing soils, GATORDIRT™ will increase the structural integrity by over 15%.
	Environmentally Friendly High Strength Soll Stabilization	Data available 2nd quarter 2008