Jetrok™ |
 |
|
Jetrok™ is an exceptionally high strength, fiber reinforced, sprayable mortar for use in Gunnite or wet spray applications. Jetrok™ has been engineered to provide tremendous bonding and flexural strengths when used in conjunction with standard PC based CMUs, CMUs manufactured with CERATECHs FORTRESS™ cement, PCC surfaces, natural stone surfaces, metal and some polymer based foams. Jetrok™ is a single component powder that is water activated. It provides up to 20 minutes of working / handling time and will reach compressive strengths of more than 4,000 psi in 24 hours and 11,000 psi in 28 days. Jetrok™ can be mixed in a standard grout / mortar mixer.
Features and Benefits
Features |
Benefits |
Rapid Strength Development |
Enables non-stop block construction |
High Strength |
Exceptional load transfer |
Exceptional bond / adhesion to masonry, concrete and other structural materials |
Stronger, more durable structures |
Water Clean-Up |
No Hazardous Chemicals Required for Cleaning Tools |
| Wide Temperature Applications | Can Be Applied in Wide Temperatures Without Effecting Long Term Performance Characteristics |
Limitations
• Ambient temperatures above 100°F/38°C or below 40°F/4°C
• Not for submerged applications
• Will not bond to polymers
Setting Time (ASTM C 266)
Set Times at 72°F/22°C
Initial set: Gel
Final set: 35 minutes
Volume Yield
16 ft²@ 0.25” thickness / 66 lb bag
Packaging:
66 lb. Lined paper bag
Shelf Life:
1 year
Storage:
Bags must be kept dry
Technical Data
Results provided by licensed engineering test laboratory and represent typical results from production materials. Actual results may vary from third party testing results; however, CERATECH’s materials meet and/or exceed established internal
| Property | RESULTS 2" cubes |
TEST METHOD |
|
| Compressive Strengths, psi (MPa) 4x8 Cylinders | |||
| 2 hours | 3250 (23.0) |
ASTM C 39 |
|
| 24 hours | 5600 (38.6) |
ASTM C 39 |
|
| 7 days | 9500 (67.8) |
ASTM C 39 |
|
| 28 days | 11000 (78.0) |
ASTM C 39 |
|
| Flexural Strength, psi (MPa) | |||
|
24 hours | 640 (4.5) |
ASTM C 78 |
| Splitting Tensile Strength, psi (MPa) | |||
|
7 days |
|
ASTM C 496 |
|
28 days |
|
ASTM C 496 |
| Direct Tension Strength, psi (MPa) | |||
|
7 days | 95 (0.7) |
ASTM C 496 |
| * Tests conducted on Jetrok™ as applied to PC based CMUs. Block failure occured at 95 psi | |||
| Bond Strength, psi (MPa) | |||
|
7 days |
|
ASTM C 882 |
| Scaling Resistance, lbs/ft2 (kg/m2) | |||
|
300 cycles |
|
ASTM C 672 |
| Modulus of Elasticity, msi (GPa) | |||
|
28 days |
|
ASTM C 469 |
| Coefficient of Thermal Expansion, in/in/°F | |||
| 28 days |
|
AASHTO TP 60 |
|
| Length Change, % of total length | |||
| 28 days |
|
ASTM C 157 |
|
WARRANTY
CERATECH, Inc. (“CERATECH”) warrants that its products are free from defects in materials and workmanship. If any CERATECH product fails to conform to this warranty, CERATECH will replace the product at no cost to the buyer or refund the purchase price, at CERATECH’s election. Any warranty claim must be made within one (1) year from the date of the shipment of the product to the buyer. In no event shall CERATECH be liable to the buyer for any consequential or incidental damages of any nature. CERATECH MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, WRITTEN OR ORAL AS TO THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF ITS PRODUCTS AND EXCLUDES THE SAME. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF
